Badigeon d'étanchéité PCI Seccoral® 2K Rapid

Features and benefits:

• Water impermeable and frost resistant, multi-purpose use indoors and out.
• Crack bridging, high reliability even if cracks in the substrate form at a later stage.
• Isolating properties, reduces tensions, can be applied to cement screeds and tiled over as soon as they are walkable.
• Good workability, creamy consistency, easy to apply by brush or trowel.
• High convenience in application due to fast setting time, but long time to form a skin.
• Low odour development, no unpleasant, irritating odour.
• Crack-free curing, the coating does not crack or crumble.
• Pervious to water vapour.

Fields of application:

• For indoor and outdoor use.
• For walls and floors.
• Officially authorized to produce bonded waterproofing in areas exposed to intense wetness meeting the requirements of moisture use classes A and B in accordance with building standard list A 2/1.10.
• Tested in accordance with DVGW worksheet W 270.
• For flexible waterproofing in case of moderate use - not officially approved - moisture use class A 0.
• For flexible waterproofing under tiles and natural stones on balcony slabs or terraces (B0).
• Officially authorized for the waterproofing of external basement walls, wet rooms and retaining walls according to building standard list A 2/1.9.
• Crack-bridging waterproofing under ceramic coverings in showers or rooms with floor drains, swimming pools, health spas, salt-water spas.
• Crack-bridging waterproofing in above and below ground situations, in new and old buildings.
• For horizontal waterproofing on and under walls (e.g. clinker brickwork etc.) against rising water through capillary action, e.g. waterproofing of foundation walls in new and old buildings.

A dry layer thickness of minimum 2 mm is required for all applications acting as waterproofing layer directly under tiles (bonded waterproofing). Examples:

Applications officially controlled (building standard list A part 2 ff. 2.50):

• Walls subject to high loads by water for industrial use and cleaning (A), e.g. in public shower facilities
• Floors subject to high loads by water for industrial use and cleaning (A), e.g. swimming pool surrounds
• Floor and wall surfaces in swimming pools (use class B) Bonded waterproofing in accordance with ZDB leaflet, current edition: (applications not officially controlled)
• Wall and floor surfaces subject to moderate exposure to non-pressing water indoors (A0) e.g. "Surfaces subject to direct and indirect use in rooms with occasional exposure to industrial and cleaning water, such as residential bathrooms, bathrooms in hotels, floor surfaces with drains in these application areas".
• Wall and floor surfaces subject to moderate exposure to non-pressing water outdoors (B0) e.g. "Surfaces outdoors subject to direct and indirect exposure to non-pressing water, such as balconies and terraces (not above rooms in use)".

Application as waterproofing of buildings officially controlled (building standard list A part 2 ff. 2.49):

• Required dry layer thickness for loads in accordance with DIN 18 195 part 4, 6 and 7: 2.5 mm
• waterproofing against ground moisture and percolating seepage water of floor slabs and walls (external basement walls)
• waterproofing against non-percolating seepage water and pressing water up to a foundation depth of 3 m
• waterproofing against water pressing from the inside (water reservoir without ceramic coating)