Elastic joint sealant PCI Silcofug ® E 310 ml

Jointoiement élastique PCI ® E 310 ml

See parts included Check stock live

Total available in stock: 4 (This variant: 0)

Couleur

Référence PSE31CG

Check stock live

Total available in stock: 4 (This variant: 0)

32,71 €

TTC

Pour obtenir un supplément 5% réduction il suffit d'augmenter la valeur de votre panier à €500.

Des remises commerciales sont disponibles pour les grossistes et les clients fidèles. Pour bénéficier d'une remise, la valeur totale de votre panier, la valeur totale de vos achats ou les achats totaux de votre compte doivent dépasser le seuil requis. Politique de remise commerciale

Seuil	Remise
€500	5%
€1000	10%
€2000	15%
€5000	20%
€10000	25%
€25000	30%

ou pour plus de détails découvrez nos remises commerciales

Ajouter au panier Ajoutez à votre panier vos sélections actuelles, et il vous suffira d'ajouter €467,29 de plus pour débloquer une 5% réduction pour la entire order.

Features and benefits:

Elastic, capable of absorbing joint movement up to 20% (cf. IVD leaflet no. 2 - Classification of joint sealants).
Resistant to weathering and UV radiation, ideal for outdoor application, temperature resistant up to +165 °C.
Contains fungicides, prevents fungal decay and mildew growth on the joint sealant.
Resistant to commercial household cleaners and disinfectants, the joint can be easily cleaned.
Very low emission, GEV EMICODE EC 1 plus.

Fields of application:

For indoor and outdoor use.
For walls and floors.
Sealing of corner joints, movement joints and connection joints in sanitary areas, on balconies and terraces.
Sealing of joints between glass, aluminium, wood, enamel, ceramic, rigid PVC and sanitary acrylic.
Sealing of glazing rebates at window frames made of wood, anodized and non-anodized aluminium (cf. DIN 18545 part 1-3 and IVD leaflet no. 10 - Glass sealing of wooden windows with joint sealants).
Sealing of butt joints at figured glass, corrugated glass, glass blocks and elements.

Base du matériau: caoutchouc de silicone, durcissement à l'acide (système acétoxy)
Composants: Composant unique
Densité: Env. 1.0 g/cm³
Taille de l'emballage: Cartouches de 310 ml avec embout à visser. (Un carton contient 12 cartouches)
Durée de conservation: min. 24 mois en cas de stockage au sec, pas de stockage permanent à plus de +30°C
Largeur du joint: jusqu'à 30 mm
Couvercles de cartouches de 310 ml: env. 3,1 mètres courants pour un joint de 10 x 10 mm - env. 12,4 mètres courants pour un joint de 5 x 5 mm
400 ml de couvertures de saucisses: env. 4,0 mètres courants pour un joint de 10 x 10 mm - env. 16,0 mètres courants pour un joint de 5 x 5 mm
Temps nécessaire à la formation de la peau: env. 10 - 15 minutes
Allongement total autorisé: max. 20 % de la largeur du joint
Dureté Shore A: env. 25
Module de traction: env. 0.6 MPa
Rétrécissement du volume: env. 6%
Adhésion sans primaire: au verre, à la céramique, à l'émail, à la résine de mélamine, au polyester, au revêtement de briques, aux tuyaux non vitrifiés, à l'acrylique sanitaire, au linoléum
Adhésion avec PCI Elastoprimer 150: jusqu'à Hostalit Z, bois à pores ouverts revêtu de verre, aluminium anodisé et non anodisé, acier inoxydable, chrome
Adhésion avec l'élastoprimer PCI 165: à Hostalit Z, PVC plastifié, PVC rigide, fenêtres en PVC, polyester brut de décoffrage
Vitesse de polymérisation: env. 2 mm/jour

No reviews

Preparation of substrate

The joint sides must be dry, structurally sound and free from dust and other contamination. Remove oil stains and grease from non-absorbent substrates with PCI Univerdünner. Fill deep joints with closed-cell polyethylene backer rod. Be careful not to damage the backer rod during the application. A three-sided adhesion of the sealant to the bottom of the joint must be avoided. Backer rods containing bitumen or tar are not allowed to be used.

Application procedure

All regular hand-operated and airoperated caulking guns (e.g. from Karl Dahm) are suitable for the application of PCI Silcofug E.
Cut off tip of threaded nipple, screw on nozzle and cut off at an angle corresponding to the joint width. Fit cartridge into the caulking gun.
Gun PCI Silcofug E into the joint using positive pressure to ensure full contact and adhesion. Tool to a bevel in corner joints.
Smooth joint sealant before a skin forms using a suitable joint-shaping tool moistened with PCI Glättmittel. A skin forms within a few minutes. Work may be interrupted because new PCI Silcofug E perfectly bonds to a material which has already cured.

Please note:

Paint does not bond to PCI Silcofug E (cf. IVD leaflet no. 12 - Overpaintability of movement-compensating joint sealants in building construction).
PCI Silcofug E is not suitable for floor joints subject to heavy mechanical loads.
Use PCI Carraferm for natural stone.
The elastic sealing of movement joints and connection joints with PCI Silcofug E is not a substitute for required sealing measures in the substrate structure.
See the technical data sheet no. 201 - PCI Elastoprimer for details on the application of PCI Elastoprimer 150 and 165.
We recommend to test adhesion to and compatibility with lacquered and plastic substrates beforehand.
Staining and bonding problems may occur in contact with mastic asphalt screeds.
PCI Silcofug E might discolour when using cleaning agents and disinfectants which separate iodine.
Minor colour variations are possible, it is therefore recommended to use the same batch number for the same project.
Opened cartridges can be stored several days if the nozzle is plugged with some sealant. Remove the cured sealant from the nozzle before any further application.
Although PCI Silcofug E contains fungicides, the joints should be cleaned with appropriate household cleaners and/or disinfectants in sanitary areas to prevent mould and mildew growth.
Suitable tools are available e.g. from Karl Dahm Ludwigstr. 5 83358 Seebruck/Germany.
Remove sealant spills with PCI Univerdünner while the material is still uncured. Cured sealant can only be removed by mechanical scraping.